Flood Resistance and Resilience
Owners of buildings in flood risk areas may wish to upgrade their properties to improve their performance in the event of flood – minimising the cost of repairing flood damage and enabling faster reoccupation of the flood affected building.
Estimated reading time: 2 minutes
The first thought that comes into most people’s minds is to take measures to prevent flood water from entering the property – e.g. flood doors, air-brick seals, waterproof coatings. This is known as “flood resistance” and is a practical flood protection measure for many properties.
However, flood resistance cannot be relied on in all situations. For example, in some cases the building structure may be unable to cope with the pressures exerted by high levels of flooding or it may simply be impractical to install flood resistance measures that can be relied upon to provide adequate protection. In these cases the alternative strategy of “flood resilience” can be employed. Flood resilience involves accepting that flood water will enter the property and taking measures to minimise the damage and disruption caused to the building.
A number of measures can be adopted to provide resistance to floodwaters in buildings at risk of flooding. Openings such as doors, windows, air bricks, and services will need to be identified and sealed using proprietary systems – e.g. flood doors. Safeguard offer a range of products that can be used to improve the flood resistance of masonry walls. The choice of system will depend on a number of factors such as the substrate condition, type of masonry (brick, stone, etc…) and whether an external rendered finish is acceptable.
Products used to improve the flood resistance of masonry include;
The diagram to the left shows a typical flood resistance system using a combination of the above products. Further options can be found on our Flooding CAD Detail page.
Where it is accepted that flood water will enter the building, because flood resistance measures are impractical or would be unable to cope with a high flood level (e.g. above 0.6 metres), flood resilience measures can be put in place to minimise the damage and disruption caused by the flood.
Typical flood resilience measures include the use of tiled surfaces that can easily be cleaned after a flood and the siting of electrical sockets and circuits above the design height level.
A further aspect of flood resilience is the management of ingressing floodwaters – diverting them away from where they would cause the most damage. Further options can be found on our Flooding page.
It should be noted that flood resistance and flood resilience are not mutually exclusive. Many flood resilience specifications will include flood resistance measures. For example, flood resilience measures may be employed in case of a worst case scenario in which high flood levels cause flood water to enter a building. However, this does not prevent flood resistance measures being employed to prevent water from entering the building at all during a less severe flood.
If your property has been affected by flooding, or if you would like information on improving your property’s capacity to deal with a flood, please contact our technical department on 01403 210204 or submit an enquiry.
How can we help?
Related Pages
Get it Done
Keep tenants safely housed with this comprehensive remediation kit to keep properties safe during significant or emergency hazards.
Read more
Stock the full Dryzone ventilation range to win the fight against damp and mould, regardless of the type of property you need to fit.
Read more
Take the necessary steps to a damp-free home this Damp & Mould Action and Awareness Week.
Read more
Winter weather is potentially damaging for masonry walls. Read this article to find out why and how you can protect your home.
Read more
Find out how we helped dry out this 18th century Grade II listed mill house renovation in the New Forest
Read more
The real culprit of indoor summer discomfort isn't high temperature, it's high humidity. Find out how to beat the humidity in this article.
Read more
Discover how Stormdry Masonry Protection Cream was used on World War 2-era gun battery magazine buttresses at Dover.
Read more
With Tibby Singh and YDC Basements, Safeguard waterproofed a basement at an end of terrace home in Leeds using Drybase Tanking System.
Read moreSubscribe to get information about products and offers.
