Damp-proofing and waterproofing specialists from Remedial Treatment Consultants were also brought in to carry out the installation works.

The Vandex BB75 was applied by trowel the next day and allowed to cure. On the third day, a 3:1 sand:cement finishing coat was applied. Vandex BB75 waterproofing slurry was also applied to the floor (following surface preparation). A screed was then poured on top.

It should be quickly established if any contamination may have occurred, as this will strongly affect how the whole flood remediation process is handled. It should be noted that although flood water may not contain contaminants from its source, it may have picked up contaminating materials during the flood period.

The first thought that comes into most people’s minds is to take measures to prevent flood water from entering the property – e.g. flood doors, air-brick seals, waterproof coatings. This is known as “flood resistance” and is a practical flood protection measure for many properties. However, flood resistance cannot be relied on in all situations. For example, in some cases…

Firstly, what caused the flood? For example, the way in which you approach remedial works will be different depending on whether the flood was caused by a failed sewage system, or was due to a river overflowing. The possibility that the water may have come from more than one source will also need to be considered.Potential future flood frequency…