0

Basement Waterproofing


Designing Basement Waterproofing Systems

Basements are susceptible to the ingress of moisture and contaminants from the ground. For this reason, a waterproofing system will usually be required. Guidance on the requirements for basement waterproofing systems is given in BS 8102:2022 “Code of practice for protection of below-ground structures against water from the ground”.

A contractor measures a cavity drainage membrane in an existing membrane.

Designing a Basement Waterproofing System

The choice of waterproofing system will depend on a number of factors such as the method & type of basement construction, the depth below ground, and the proposed end use. The example designs on this website are intended to demonstrate how BS 8102:2022-compliant solutions can be achieved for some of the most common basement waterproofing scenarios.

Ventilation

In addition to dampness from the ground, basements are also commonly affected by condensation issues due to moisture-laden air within the basement structure. For this reason, the waterproofing systems described in this guide will usually need to be supplemented by mechanical ventilation. A waterproofing design specialist (see below) will be able to advise on suitable ventilation options depending on the proposed end use (e.g. car parking or document storage)

Design Specialist

A waterproofing design specialist with a CSSW qualification should be consulted at the design stage. Please contact our technical department on 01403 210204 or find a specialist for details of suitable basement design specialists in your area.

Type-A, Type-B or Type-C Waterproofing?

According to BS 8102:2022, basement waterproofing system materials fall into 3 main categories (referred to as ‘Types’).

Safeguard Basement Systems are combination Type A and C waterproofing systems. This means that there are multiple barriers to water ingress. In the unlikely event that one system should fail, there is always a supporting system to prevent water ingress.

Type A – Barrier Protection

The Drybase Tanking Range provides BS 8102-compliant Type A waterproofing.

Type C – Drained Protection

Type C waterproofing collects groundwater through a cavity membrane and cavity drainage system. The cavity membrane controls the flow of groundwater. The cavity drainage system carries it away from the basement and disposes of it away from the below-ground structure.

Drybase Flex Membrane and the Oldroyd range of Cavity Drainage Membranes provide BS 8102-compliant Type C waterproofing.

Safeguard Example Type A and Type C Basement Systems

New build basements specification diagram with a completed basement in the background. Version 1.

New-Build Basements

Safeguard Basement System 1

Find Out More

Dig-Out Basements

Safeguard Basement System 2

Find Out More

Piled Retaining Wall Basements

Safeguard Basement System 3

Find Out More
An example of a system 4 basement design. Basement photograph background.

Basement Refurbishment

Safeguard Basement System 4

Find Out More

Get it Done

Drybase Crystalline Active Slurry (25Kg) A cementitious, ready mixed in-depth waterproofer for concrete surfaces only.
£75.99
Oldroyd Xv20 Cavity Drainage Membrane (2m x 15m Roll) High flow-capacity 2m x 15m cavity drainage membrane with 20 mm stud profile.
£285.29
Drybase Flex Membrane (1.2 m × 15 m) A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs
£161.99
£{* exTotalPrice *} £{* totalPrice *}
All Articles
Advice
Case Studies
News
Case Study
Domestic Property Basement Renovation Part 1 – Drybase Tanking System

With Tibby Singh and YDC Basements, Safeguard waterproofed a basement at an end of terrace home in Leeds using Drybase Tanking System.

Read more
Drybase TS PLUS News Card Image News
Out Now: Drybase TS-PLUS

A durable and easy to apply layer for domestic and commercial applications on concrete and brick surfaces.

Read more
Case Study
1940s Concrete Pillbox, West Sussex — High-Performance Waterproofing with Stormdry Masonry Protection Cream

Built in Summer 1940, the Type 26 pillbox is a 6 ft by 6 ft cube just big enough to house 4 soldiers and their guns. The 1 m thick concrete walls were built to withstand a direct hit from a naval warship. 98 tons of concrete went into creating the pillbox. In the 1980s, the whole exterior was covered…

Read more
Different stages of Stormdry Masonry Protection Cream soaking in the wall. Advice
Masonry Sealants

Water is one of the main causes of structural damages to buildings. Moisture ingress caused by climatic influences, groundwater or condensation can lead to cracks and frost damage, as well as algae, fungus and moss growth. Over the years, salt and lime efflorescence can occur and severely disfigure masonry. In addition penetrating rain can introduce dirt into masonry and result…

Read more
New NOPE! Products Card (cropped) News
Out Now: New NOPE! Range

Fix fleas as well as other crawling and flying insects with new NOPE! Flea Killer Powder and NOPE! Insect Killer Smoke Bombs.

Read more
A flea on a fingertip Advice
How to Get Rid of Fleas

Most people worry about their pets when you mention fleas.  But a flea infestation is notoriously difficult to shift and can harm everyone in the home.  Find out how to get rid of fleas with this handy reference guide.

Read more
Case Study
Domestic Bungalow, Swindon - Cleaning and Preventing Mould

When Emerald Damp Specialists stepped inside a severely damp bungalow in Swindon, they knew they had to help. Along with 70 other companies and over 150 volunteers who donated their time and expertise, Emerald Damp Specialists resolved the extreme damp and mould problems at the property free-of-charge. For this project, ensuring that a valued member of the community had a…

Read more
Advice
Traumatic Damp

Penetrating damp, rising damp and damp caused by condensation are well recognised and documented within the building industry. The government guidance on damp and mould brought another form of dampness to light - one that is well-known but not often thought about in its own category. This new term for dampness caused by a leak or environmental flooding is 'traumatic…

Read more
Join our newsletter

Subscribe to get information about products and offers.