Dry Rot
Dry rot (Serpula lacrymans) is a wood-destroying fungus that is found in most parts of the world.
Although it affects forest timbers, dry rot is best known for its ability to destroy timbers in ships and buildings.
Estimated reading time: 3 minutes
Dry rot is a type of wood-decaying fungus that digests wood. It is an aggressive growth that feeds on moisture and timber and spreads in the wild as well as on man-made wooden structures.
Each stage of dry rot growth is unique. The mycelium growth is white and furry, while the fruiting body (Sporophore) is a rusty and metallic orange-red colour. Timber damaged by dry rot will be fragile, brittle, dried out and warped.
Dry rot occurs when Serpula Lacrymans fungal spores settle on wood with moisture levels in excess of 20%. Timber that is not already damp prior to growth will not germinate dry rot.
Dry rot almost always needs professional attention as it causes extremely aggressive and widespread damage to timber. Treatment requires the total removal of affected wood. The removal of all moisture sources. Affected wood to dry out. The application of a wood preservative to further prevent future infection.
Dry rot treatment can be more expensive than prevention. The removal and replacement of affected timber can be a costly process, depending on how advanced the infection is. Following treatment, Roxil Wood Preserver is a great preventative measure to stop rot reoccurrence.
Dry rot is dangerous because it grows very quickly and makes timber structurally unstable. You should never enter a structure with a known or suspected dry rot infestation.
It is important to identify whether timber decay has been caused by dry rot or another wood-destroying fungus such as one of the wet rots. This is because dry rot has the ability to travel through building materials other than timber, giving outbreaks the potential to spread quickly through a building. For this reason additional measures (e.g. masonry sterilisation) often have to be taken when treating dry rot outbreaks over and above those necessary when dealing with outbreaks of other wood-rotting fungi.
How to Diagnose Dry Rot:
Wood shrinks, darkens and cracks in a ‘cuboidal’ pattern
A silky grey to mushroom coloured skin frequently tinged with patches of lilac and yellow often develops under less humid conditions. This ‘skin’ can be peeled like a mushroom.
White, fluffy ‘cottonwool’ mycelium develops under humid conditions. ‘Teardrops’ may develop on the growth.
Strands develop in the mycelium; these are brittle and when dry and crack when bent.
Fruiting bodies are a soft, fleshy pancake or bracket with an orange-ochre surface. The surface has wide pores.
Rust red coloured spore dust frequently seen around fruiting bodies.
Active decay produces a musty, damp odour.
Dry rot will only affect timber that is damp, typically affecting timber with a moisture content in excess of 20%. For this reason, removing the source of moisture should form the core of any dry rot eradication strategy.
Timber can become damp for a number of reasons. Among the most common causes are leaking washing machines, shower trays, baths and condensation. The dampness can also come from outside the building, for example, leaking roofs, rising dampness, or dampness penetrating through walls. Whatever, the source of the dampness, if it is rectified and the timber allowed to properly dry out, the dry rot will eventually be controlled.
However, it is not always possible or practical to be sure that the timbers will remain dry in the long term. Therefore, it is important that secondary measures are taken to defend against re-infection. Any affected timbers should be removed and replaced with pre-treated timber. Any remaining timbers at risk of being impacted by the dry rot should be treated with an effective fungicide.
Where the dry rot has passed through masonry as in the photo on the right, it should be isolated using physical containment and / or masonry sterilisation.
Safeguard’s ProBor range of wood preservatives are particularly suitable fungicides for the treatment of dry rot, as they are able to spread much more deeply into the timber than conventional preservatives. This gives them an extensive performance advantage, as no wood preservative can start working until it comes into contact with the fungi that it is designed to defend against.
What is dry rot in wood? To find out more, download our more comprehensive 19-page guide, Dry Rot & its Control, to the right. This publication gives more detailed guidance on the identification and treatment of dry rot.
How can we help?
Downloads
Related Pages
Get it Done
Keep tenants safely housed with this comprehensive remediation kit to keep properties safe during significant or emergency hazards.
Read more
Stock the full Dryzone ventilation range to win the fight against damp and mould, regardless of the type of property you need to fit.
Read more
Take the necessary steps to a damp-free home this Damp & Mould Action and Awareness Week.
Read more
Winter weather is potentially damaging for masonry walls. Read this article to find out why and how you can protect your home.
Read more
Find out how we helped dry out this 18th century Grade II listed mill house renovation in the New Forest
Read more
The real culprit of indoor summer discomfort isn't high temperature, it's high humidity. Find out how to beat the humidity in this article.
Read more
Discover how Stormdry Masonry Protection Cream was used on World War 2-era gun battery magazine buttresses at Dover.
Read more
With Tibby Singh and YDC Basements, Safeguard waterproofed a basement at an end of terrace home in Leeds using Drybase Tanking System.
Read moreSubscribe to get information about products and offers.
