CAWS Clause J30-130

J30 LIQUID APPLIED TANKING / DAMP PROOFING

To be read with Preliminaries / General conditions.

130 COLD APPLIED DAMP PROOFING

Drybase Liquid-Applied DPM

Drybase Liquid-Applied DPM is a single-pack waterproofing system that is supplied ready to use. The product is supplied as a black or white liquid, which, once applied cures to form a membrane that is flexible, elastic, and resistant to abrasion and UV light. Drybase Liquid-Applied DPM is water-based and safe to apply onto damp surfaces by brush, roller or spray. Consult Safeguard Europe Ltd technical literature for details. Safeguard Europe Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Consult Safeguard Europe Ltd technical literature for details. Safeguard Europe Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Substrate:

Insert requirements.

Primer:

No priming required.

Preparation:

All contact surfaces must be sound, clean and smooth with a trowelled or brushed finish. Any masonry should be flush pointed and defects in existing surfaces made good. Remove any laitance, dust, loose material or surface water.

Coating material:

Manufacturer:

Product reference:

Drybase Liquid-Applied DPM.

Number of coats:

Two coats minimum.

Coverage per coat (minimum):

1.1 l/m² applied in two coats of 0.55 l/m², to achieve a minimum wet film thickness of 1.1 mm (dry film thickness 0.6 mm)

Reinforcement:

No reinforcement required.

Blinding:

Consult Safeguard Europe Ltd technical literature for details.

Safeguard ECS Epoxy Floor Coating

ECS Epoxy Floor Coating is a two-part water-dispersed epoxy resin product consisting of a pigmented base resin component and a water-dispersed hardener component. The product is available in white and clear versions. ECS Epoxy Floor Coating can be applied by brush or lambs wool roller to provide a decorative coating which is easily cleaned. The applied coating will protect concrete and is resistant to the penetration of oils and greases.

Consult Safeguard Europe Ltd technical literature for details. Safeguard Europe Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Substrate:

Insert requirements.

Primer:

Preparation:

All contact surfaces must be sound, clean dry and provide a ‘light’ mechanical key. Remove all loose material, paint, plaster and oily deposits.

Coating material:

Manufacturer:

Number of coats:

Finishing coats:

Two.

Type:

Two-part water-dispersed epoxy resin.

Colour:

White / Clear.

Coverage per coat (minimum):

Consult Safeguard Europe Ltd technical literature for details.

Reinforcement:

No reinforcement required.

Blinding:

Consult Safeguard Europe Ltd technical literature for details.

Drybase Liquid-Applied DPM

Gas barrier (radon, methane, carbon dioxide)Damp-proof barrierFlood resilience and mitigationIsolating embedded timbers (e.g. to protect against dry rot)Damp-proofing of reglet jointBunds and silage tanks.

Read more

#damp #Rising Damp #waterproofing

Drybase ECS Epoxy Floor Coatings

Drybase ECS Epoxy Coatings are highly durable damp-proof epoxy coatings for floors and walls. They are ideal for sealing concrete floors and walls, creating a trafficable, damp-resistant and stain-resistant surface. There are two different Drybase ECS Epoxy Coating products:

Read more

#waterproofing #floors