Ready-to-Use
Solvent-Free
Low Odour
ProBor 50.1 is a ready-for-use wood preservative paste based on boron, a naturally occurring mineral with a long history of use. It is supplied in a 310 ml cartridge for use with a standard mastic gun. ProBor 50.1 is designed to be injected into timber. It can also be applied to the surface of timber, although it should be noted that a white deposit will be left.
ProBor 50.1 is commonly used as a wood preservative when treating large dimension timbers. It is injected into timber via pre-drilled holes, thus ensuring complete distribution of the active ingredient deep within the wood. In general 10 mm holes spaced no more than 150 mm apart are recommended. The number of holes should be adjusted to give a product loading of 5.9 litres per cubic metre.
Other common areas of application include the treatment of joist ends and wooden window frames.
ProBor 50.1 replaces dated boron rod technology. Diffusion of ProBor 50.1 starts well below the 18 – 22% moisture level where wood becomes susceptible to dry rot. Boron rods do not start to diffuse until a moisture content of more than 30% is reached.
Full details about ProBor 50.1 Paste and other wood preservatives in our range are contained in the ProBor datasheet which can be downloaded from this page. A 19-page guide, Dry Rot & its Control can also be downloaded.
How can we help?
Related Pages
Get it Done
Subscribe to get information about products and offers.