Yes, it can. Wait at least 24 hours after Raincheck LS application before applying Stormdry MAX.
Clear liquid
3.5 m² per litre
2–10 mm
Up to 10 years (with regular maintenance)
Raincheck LS
Waterproofs limestone
Alkali- & UV-resistant
10 year service life
Penetrates 2 – 10 mm
Raincheck LS is a colourless water repellent for limestone based on UV-resistant silane-siloxane resins. The composition of Raincheck LS allows the water-repellent material to bond to the carbonates in limestone. Raincheck LS can be used on old and new buildings to protect against penetrating damp. Raincheck LS has excellent water-repellent properties but still allows the wall to breathe because it leaves pores unblocked so water can still evaporate out of the wall without letting any water in.
The product is suitable for the treatment of absorbent limestone rather than very dense types.
Application
One litre of Raincheck LS will cover 2 – 4 m2
Best applied when it has not rained for 24 hours
Application With Brush or Lambswool Roller
This method is recommended if the areas to be treated are small or if the wall has a large number of windows. Special care should be taken to ensure that sufficient Raincheck LS is applied (1 litre product per 2.5 to 3.5 m2 per coat), since the success of the treatment depends on this. At least two coats should be applied wet on wet.
Application by Coarse Spray
This method is recommended when treating large areas. Application should start at the highest point working from side to side allowing ‘run down’ of the fluid for 15 – 30 cm. It is advisable to flood coat twice (Raincheck LS being applied wet on wet). On poorly absorbent surfaces one coat of Raincheck LS will usually suffice.
Yes, it can. Wait at least 24 hours after Raincheck LS application before applying Stormdry MAX.
Can I overpaint Raincheck LS?
Raincheck LS Masonry Waterproofing Solution cures very quickly, so overcoating with a water-based paint is not possible. We have not tested a solvent-based paint overcoat, so we cannot recommend you do so.
Subscribe to get information about products and offers.
Can Stormdry MAX be applied onto Raincheck LS?