To be read with Preliminaries / General conditions.
Raincheck Plus is a colourless water-repellent for masonry based on UV-resistant siloxane resins. It is alkali-resistant and can therefore be used in situations where other siloxane-based water-repellents are not suitable; on newly pointed brickwork for example. Raincheck Plus can be used on old and new buildings to protect against penetrating damp and to keep masonry clean. Raincheck Plus will not block the pores in masonry so water vapour is able to escape.
Consult Safeguard Europe Ltd technical literature for details. Safeguard Europe Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.
Manufacturer:
| Safeguard Europe Ltd. Redkiln Close, Redkiln Way, Horsham, West Sussex, RH13 5QL | Tel: 01403 210204 Fax: 01403 217529 Email: [email protected] Web: www.safeguardeurope.com |
Product reference:
Raincheck Plus Water-Repellent for Masonry (alkali-resistant)
Surfaces:
Insert requirements
Preparation:
Major cracks in brickwork must be filled. Hairline cracks up to 0.3 mm can be bridged by Raincheck Plus. Dirty surfaces should be cleaned before impregnation, using any proprietary acid or alkaline brick cleaner. Do not use detergents. Steam cleaning or grid blasting is also suitable. Rust, tar and bitumen stains must also be removed with a non-detergent cleaner prior to application.
Type:
None
Number of coats:
Not applicable
Type:
Water-repellent for masonry based on UV-resistant siloxane resins / alkali and UV-resistant siloxane resins.
Number of coats:
Two (depending on application method)
How can we help?
Subscribe to get information about products and offers.
