BrickFix CE1 Grout

BrickFix CE1 Grout is a high performance, non-shrink grout formulated for fixing BrickFix Helical Bar into masonry – e.g. for masonry crack repairs. It is non-gassing and is suitable for application using a BrickFix Applicator Gun.

BrickFix CE1 Grout’s thixotropic formulation allows it to completely fill all voids into which it is injected. It develops compressive strength rapidly and is suitable for bonding metal components into most common masonry substrates such as brickwork, stonework, block-work, concrete, etc…

Grout Application

BrickFix CE1 Grout is supplied as a two-component formulation comprising of a liquid and a powder component. Before use the liquid and the powder should be thoroughly mixed according to the instructions on the pack.

The grout should be applied using a BrickFix Applicator Gun.

Consumption

The examples below give typical consumption rates for the insertion of BrickFix Helical Bar into masonry using BrickFix CE1 Grout:

Single bar insertion (10 mm wide × 40 mm deep slot) = 8 to 10 linear metres per 3 litre pack
Twin bar insertion (10 mm wide × 55 mm deep slot) = 6 to 8 linear metres per 3 litre pack.

How can we help?

Get it Done

Drybase Overseal Tape (75m Wide, 20m Roll) Drybase Overseal Tapes seal over joints between cavity drainage membranes and other materials.

£31.19

Drybase Seals for Plaster Plugs (150 Pack) Seal washers for Drybase Plaster Plugs.

£19.50

1 L Stormdry Masonry Protection Cream 352x112

Stormdry Masonry Protection Cream (1 Litre) Paintable waterproofing cream for exterior brickwork, masonry, mortar and concrete. BBA approved to protect for 25 years. Clear finish.

£34.99

£{* exTotalPrice *} £{* totalPrice *}

Downloads